The Custom Burner is the original gas log pan burner invented by T.R. Rasmussen in 1958. The logs sit in the welded steel rectangular burner pan, which creates an engulfing flame with a band of glowing embers. The Custom Burner can be installed on legs for a clean look (or if the gas supply is out of the floor) or placed flush on the firebox floor with accessory volcanic ash ramped to create a pit appearance. Custom Burners are available for natural gas and propane and can be used with a variety of safety controls, including wireless remote.
The Rasmussen CS Custom Embers Vanisher Vented Burner is an original pan with burner that will offer a great looking fire in your fireplace. With the Valve Vanisher design it also raises the burner by 2 5/8", but eliminate the big black box that holds the ignition and centers your log set.
“CS” Burner – Rectangular-shaped full-pan burner. Single pipe with baffle to distribute gas. Logs, FireBalls, etc. sit in the pan – no grate is used. 4.25” high with the legs, 2” high without the legs. Use in Single, Double and Multi-sided fireplaces.
Valve Vanisher Features:
- Eliminates the off-centering or downsizing of the log set
- Heat sensitive controls now located in a cooler zone
- Raises burner by 2 5/8" creating a false floor underneath
- Factory assembled and tested
The burner pan is constructed of heavy 16-gauge steel, with 1/2" schedule-40 pipe for the main burner tube and 1/4" steel tubing for the ember booster. This burner can run on natural gas or propane and is available in many sizes to meet your needs. Each system comes complete with.
|